SMOK Mag P3 Review: Trigger-Inspired and Powerful C Box Mod 230W

The vapeciga smok mag p3t is a magic kit inspired by an improved trigger from a series of smoke smokers, very popular, which has published a Watt Kit and Fort Vape. Smok Mag P3 is modeled after the gun handle works with the activation button and design of the design of the firearms handle, which is suitable to maintain. This is more approximate than its predecessor and integrates the IP67 and waterproof anti-dust design. Compatible with Dual 18650 batteries (sold separately) and equipped with an IQ-M intelligent chipset, the MAG P3 of FMOK continues the maximum disposal of 230W aggressive and a fast speed of 0.001. Twin with a 9 ml Ahum TFV16 tank, you do not need to recharge the tank in the coming days. The blocking system located at the top of the tank prevents fleeing. The adjustable air flow control system takes a good taste and a great steam.


Color: Black Black, Red Red, Black Green, Black Blue, Black Gray




Size: 72.3 x 36.0 x 91.6mm

Battery: 2 x 18650 (not included)

Watt rank: 1-230W (VW) / 10-230W (TC)

Input voltage: 6.4-8.4V

Output voltage: 0.5V-8.2V

Voltage range: 0.5-9V

Alert at this time: <400UA

Load voltage: 5V

Load now: 1.8A

Speed API: 0.001S

Resistance: 0.1-2.5ohm (VW) /0.05-2.0ohm (TC)

Temperature range: 200 ℉ -600 ℉ / 100 ℃ -315

Screen: 1.9-inch HD HD touch screen

Thread: 510.

Smoking tank TFV16:


Size: 32 x 64.5mm

Capacity: 9 ml (standard) / 2ml (TPD)

TFV16 conical mesh 0.2OHM Reel is compatible with NexMesh (pre-installed) technology

TFV16 Dual Mesh 0.12hm Reel

Drop drop: 16 mm resin drop end

Material: Stainless steel + glass + resin.

Thread: 510.

1 x Smok Mag p3 mod

1 x TFV16 smoker tank

1 x 0.2Ω conical mesh Nexmesh Drink (Pre-installation)

1 x 0.12Ω double mesh coil

1 x Silicone handle for bulb glass

1 x rectum glass replacement

1 x USB cable

1 x User’s Guide

1 x Spare parts

Quality Kit and Design Smok Mag P3


Vapeciga smok nord shows the ergonomic design of the handle. The upper plate extends over the criminals between your thumb and its index for a comfortable handle. The fire button is under your finger as a true trigger. MAG P3 MOD Measurement at 72.3 x 36.0 x 91.6 mm and weighs 251.5 grams, which feels pretty and fits perfectly into your hands. The mod is covered with a soft touch with a contrast panel, which feels soft and soft. A large touch screen of 1.9 inches with the UI interface easy to use and locked with a four-digit password to avoid operating errors.


There is a “MAG P3” mark on the back of the mod. The micro USB charging port remains at the base of the mod with a silicone cap to avoid water and dust. Cover the battery at the bottom of the mod. You can open an HED battery door to start by pressing the ergonomic button. The gold-plated connection of 510 can accommodate the TFV16 tank of 28 mm with perfect. You can even accommodate a diameter of the tank of 35 mm without the projection. The TFV16 tank with the loading system on the slip is the wind recharge. The adjustable air flow control system allows you to squeeze or loosen the air flow according to your preferences. Smok Mag p3 kit is also equipped with two rollers, offering you a very good taste and great steam.


Smok Mag p3 mod


FOK MAG P3 is a modified and rough box that is waterproof, anti-dust and impact resistant. The exterior is durable and robust designed for difficult conditions. The chassis like rubber is solid and worn. The IP67 ranking allows P3 to maintain water immersion up to 3 feet or 1 meter for 30 minutes maximum. The fire button in the trigger form on the mod side, by clicking on the click and reagent.


Fuel smok fetch show new driven by a Dual 18650 battery and is loaded into the micro USB port with 1.8 APM. We advise you to fill the battery outside. The advanced IQ-M chips offer a rapid ramp of 0.001 and a strong performance. MAG P3 can pull 1W to 230W and handle several heating elements, including stainless steel, nickel and titanium. MOD can automatically recognize the resistance of the sprayers and offers some safety protection, such as overheating, short circuits and involuntary puff, etc. 1.9-inch HD touch screen and directly, allowing you to control all configurations. The opening sliding function that appears when you click on the fire button, avoid accidentally changing.


FMOK MAG User Guide P3 Mod:


Operation of the fire button:


5 Click on the Fire button to turn on or off the mod

3 Click on the fire button to lock the fire button

2 Click on the fire button for stealth mode and dead screen

The screen is displayed during steam:


I can not

Key icon

Two battery indicators

Duration of the last blow mode, watts and fire.

Resistance of the coil,

Resistance to reel, drawn volt, current and inflatable.

Slide indicator to unlock

Shows the main screen:


Mode – Wattage (Normal, Hard, Soft, Time)

My mode (4 custom configurations)

Puff / Limit Meters

Settings – Define a 4-digit password

Sub MoM Sub Tank TFV16


I will not discuss the details in the TFV16 smoking tank because we have already discussed it very detailed. You can click here to see the detailed Reviews of smok rpm40 get code.


Fake TFV16 Sub-Ohm Tank is an absolute monster. It measures the diameter of 28 mm and has a large capacity of 9 ml, which is good if you do not like to fill the tank. Made of Pyrex glass and stainless steel, a strong and powerful TFV16 tank. Anti-missing designs and filling can handle gorilla gorillas or easily get a glass. The increase in TFV16 base increases air flow consumption to provide large serious clouds.


Comments about Smok Mag P3 Kit


Smok Mag P3 Kit works very well, especially with TFV16 attachments. It is a strong and rugged VAPE device that gives you many useful functions and several modes for different steam needs. Double 18650 Battery with improved IQ-M chip offers an output up to 230W at an ultra fast speed of 0.001. IP67 and anti-powder waterproof design makes it good for outdoor use. The large 2-inch screen is clear and easy to use. The fire button inspired by sensitive and innovative triggers. In general, the smok rpm 40 click in comes with all of you, you want most steam devices. It is suitable for a person in search of high performance and strong devices.


Advantages and Disadvantages of the MAG P3 Smok Kit:



Building of good quality

Waterproof, anti-dust and shock-resistant.


Battery door of the hinge below

You can accommodate most of the tares

The IQ-M chip provides several modes and safety protection.

2-inch large touch screen for easy use

First test loading system

Big airflow socket for aromatism

9ml great e-liquid capacity

The inconveniences:

Only 18650 that 21700

Biggest for small hands


You can buy here:smok

sourcemore thanks

No Comments, Be The First!